LTPA-10

Description

Daytona LTPA10 10,000 lb Two Post Clear Floor Car Lift

The Daytona LTPA10 10,000 lb Two Post Car Lift gives professional shops and serious home garages a versatile clear-floor lifting solution. Its three adjustable width settings let you configure the lift around your available bay space while providing drive-through clearances of 88.6″, 94.5″, or 100.4″.

Dual direct-drive hydraulic cylinders provide the lifting power, while cable equalization helps keep the lift synchronized. In addition, automatic safety locks use a convenient single-point release. Three-stage front arms, screw-up pads, and standard truck adapters give technicians flexibility when positioning a variety of vehicles.

The overhead design keeps the floor between the columns clear, making it easier to move tools, transmission jacks, oil drains, and other shop equipment beneath the vehicle. This heavy-duty equipment is designed to deliver maximum performance in professional and home garage environments.

FEATURES

• 10,000 lb lifting capacity with the lift arms fully extended
• Clear-floor two-post design keeps the working area between the columns unobstructed
• Three adjustable column-width settings for greater installation flexibility
• 88.6″, 94.5″, or 100.4″ drive-through clearance depending on width configuration
• Dual direct-drive hydraulic cylinders with cable equalization
• Automatic safety locks with single-point lock release
• Three-stage front arms for flexible vehicle positioning
• Three-stage screw-up lift pads
• Height limit switch helps protect against excessive upward travel
• High-polymer polyethylene wear-resistant slide blocks
• Rubber door guards help protect vehicle doors
• Truck adapters included as standard equipment
• Durable powder coat finish

SPECIFICATIONS

• Brand: Daytona Automotive Equipment
• Model: LTPA10
• Product Type: Two Post Adjustable Clear Floor Car Lift
• Lifting Capacity: 10,000 lbs
• Drive System: Dual direct-drive hydraulic cylinders with cable equalization
• Power: 240V, 3 HP, 13A, Single Phase, 60Hz
• Overall Height: 141.6″ to top of post
• Overhead Clearance: 134.2″ under top bar
• Outer Width at Post Bases: 126.8″ / 132.7″ / 138.6″
• Outer Width at Posts: 118.9″ / 124.8″ / 130.7″
• Inside Width Between Posts: 100.8″ / 106.7″ / 112.6″
• Drive-Through Clearance: 88.6″ / 94.5″ / 100.4″
• Clearance Under Arms at Full Height: 70.9″
• Minimum Arm Height: 4.5″
• Control Box / Switch Height: 67.9″
• Post Base Width: 15.7″
• Post Width: 9.1″
• Lift Shipping Dimensions: 145″ x 30″ x 26″
• Lift Shipping Weight: 1,700 lbs
• Power Unit Shipping Dimensions: 31″ x 12″ x 11″
• Power Unit Shipping Weight: 60 lbs
• Truck Adapters: Included

INSTALLATION:

Daytona specifies a minimum 144″ (12′) ceiling height for the standard LTPA10 installation. The lift must be installed indoors on a minimum of 6″ of 4,000 PSI concrete. Because proper anchoring, column placement, electrical service, and lift setup are critical to safe operation, always follow the current Daytona LTPA10 installation manual and applicable local requirements.

OPTIONS AVAILABLE

• LTPA10-EXT 2′ Height Extension Kit: Available separately for shops that need additional overhead clearance for taller vehicles.
• With the optional 2′ height extension installed, Daytona specifies a minimum ceiling height of 168″ (14′).
• Additional Daytona lift accessories may be available depending on the vehicle and application.

Frequently Asked Questions

Q: What is the lifting capacity of the Daytona LTPA10?
A: The LTPA10 has a rated lifting capacity of 10,000 lbs, including with the lift arms fully extended.

Q: How wide is the Daytona LTPA10?
A: The lift has three installation width settings. Depending on the selected position, drive-through clearance is 88.6″, 94.5″, or 100.4″. This flexibility helps the lift fit different shop layouts and service bays.

Q: How much ceiling height do I need for the LTPA10?
A: Daytona specifies a minimum ceiling height of 144″ (12′) for the standard lift. With the optional 2′ height extension, the minimum ceiling height increases to 168″ (14′).

Q: What concrete is required for the Daytona LTPA10?
A: Daytona currently specifies a minimum of 6″ of 4,000 PSI concrete. Always verify the slab condition and follow the current installation manual before drilling or anchoring the lift.

Q: Are truck adapters included?
A: Yes. Daytona lists truck adapters as standard equipment with the LTPA10.

Q: Is the height extension included with the lift?
A: No. The LTPA10-EXT 2′ height extension kit is an optional accessory and is sold separately.

WHY CHOOSE DAYTONA?

Daytona Automotive Equipment builds the LTPA10 around the features technicians expect from a serious two-post service lift. Dual direct-drive cylinders, automatic safety locks, adjustable width settings, three-stage front arms, and included truck adapters create a practical package for everyday automotive service.

Furthermore, the adjustable-width design makes the LTPA10 especially useful when shop space or vehicle mix changes. Instead of limiting the lift to one fixed column spacing, Daytona provides three installation widths so you can select the configuration that works best for your bay.

WHY SHOP WITH SHOP TOOLS OUTLET

At Shop Tools Outlet, we combine competitive pricing, fast shipping, and dependable customer service to help automotive professionals and home garage owners choose equipment with confidence. Additionally, our team works with automotive equipment every day, so we understand the products we sell and the customers who rely on them.

Furthermore, we believe in honest Midwestern values and treating customers the way we would treat our own family. That means straightforward communication, reliable support, and real people answering the phone when you need help.

No runaround. No games. Just dependable service from people who care about earning your business.

Be sure to follow us on Facebook, Youtube, Instagram, Twitter, and LinkedIn for all our Social Media Updates!