Martins MW-60

Description

Martins Industries Flatematic Single MW-60 Automatic Tire Inflator | 1 Outlet

The Martins Industries Flatematic Single MW-60 Automatic Tire Inflator is a professional wall-mounted tire inflation system designed to improve speed and accuracy in busy service environments. Tire shops, automotive repair facilities, and fleet maintenance departments rely on automatic inflators like the MW-60 to ensure consistent tire pressure while freeing technicians to work on other tasks.

Instead of manually checking and adjusting pressure, technicians simply preset the desired PSI and attach the clip-on chuck. The inflator then automatically fills or releases air until the correct pressure is reached. As a result, technicians save time, improve accuracy, and increase productivity across the shop.

In addition, the large digital display, long air hose, and audible completion signal make daily tire service faster and more efficient. This automatic tire inflator is designed to deliver maximum efficiency, precision, and reliability in professional tire service environments.

FEATURES

• Automatic Inflation & Deflation: Technicians preset the pressure and the inflator automatically fills or releases air until the correct PSI is reached.

• 145 PSI Maximum Pressure: Handles passenger vehicles, light trucks, and many commercial tire applications.

• 25-Foot Air Hose: Allows technicians to reach all tires on the vehicle without repositioning equipment.

• Hands-Free Clip-On Chuck: Attaches securely to the valve stem so technicians can perform other tasks while the tire inflates.

• Backlit Digital Display: Clearly shows pressure readings even in dimly lit shop environments.

• Multiple Pressure Units: Switch easily between PSI, BAR, kPa, and kg/cm² depending on shop preference.

• Overpressure Protection System: Prevents over-inflation and improves technician safety during operation.

• Audible Completion Alert: Notifies the technician immediately when the desired pressure has been reached.

• High Inflation Speed: Inflates a standard 11R22.5 truck tire from 0–100 PSI in approximately 2 minutes and 20 seconds.

• Durable Commercial Construction: Designed specifically for high-volume automotive service shops.

SPECIFICATIONS

• Maximum Inflation Pressure: 145 PSI (10 bar)

• Maximum Inlet Air Pressure: 150 PSI

• Accuracy: ±0.29 PSI

• Air Hose Length: 25 ft (7.6 m)

• Power Supply: 110V

• Display Type: Backlit LCD

• Measurement Units: PSI / BAR / kPa / kg/cm²

• Inflation Time: Approx. 2 min 20 sec (0–100 PSI on 11R22.5 tire)

• Mounting Type: Wall Mounted

• Weight: Approx. 14 lbs

INSTALLATION:

Before installation, make sure your shop air compressor provides clean, regulated compressed air. The inlet pressure should not exceed 150 PSI. In addition, Martins Industries strongly recommends installing an air filter between the compressor and inflator to prevent oil or moisture from entering the unit. After mounting the inflator securely to the wall, connect it directly to the shop air supply and electrical power. Once installed, technicians can immediately begin using the system for fast and accurate tire inflation.

OPTIONS AVAILABLE

• MW-Stand Inflator Stand

• Flatematic 4-Way Automatic Tire Inflator

• Replacement 25-ft Hose Assemblies

• Replacement Clip-On Air Chucks

• Tire Inflation Safety Cages

Check out Martins Youtube Video Review of their line of inflators: