AMGO OH-10

Description

The AMGO OH-10 is one of our best selling car lifts. This clear floor hydraulic two post hoist is rated for 10,000 lbs.  It has Super Asymmetric lift arms.  The front arms are three-stage and extend over 42″. The rear arms are two-stage and extend over 58″.

Dual Height Installation Option:

One of the OH-10’s best features is the dual height installation option. This lift can be installed at 142 ½” or 150 ½” for shops that have adequate ceiling height. The two-piece column is adjustable for either height during installation.  At the 142 ½” setting, you can install this car lift in ceilings at 12′ or more height.

Direct Connection Hydraulic Cylinders:

Direct connect cylinders power the heavy duty lift arm carriages. The cylinders are synchronized with 3/8″ aircraft grade cables, keeping all four arms level while raising the vehicle.  A single lock release handle on the power unit side, makes operating the lift up and down simple and easy. Saddle pads drop into place on the lift arms.  There are 3 different height stackable adapters included with this lift.

With the industries best warranty; 5 years structure, 3 years hydraulics, and 2 years electrical; it’s hard to see where anyone can go wrong when installing the AMGO OH-10 in their service shop or garage.

Features and Benefits:

• Dual height installation design for either 142 ½” or 150 ½”
• Super asymmetric lift arm design allows for further forward vehicle load
• Direct connection cylinders don’t require chains to maintain or monitor
• Single point safety lock release is located on the power unit side
• Overhead electronic shut-off bar protects damage to vehicle tops
• Stackable height adapters in 1 ½”, 2 ½”, and 5″
• Large rubber door guards protect damage to vehicle doors
• Low profile arms when lowered allow access for tight clearances
• Column width is over 112″ for easy drive through
• 2.0 hp single phase 220v hydraulic power unit
• Takes approximately 3 gallons of AW-32 hydraulic oil

OPTIONS AVAILABLE:

• LED LIGTH KIT; P/N 201128
• SADDLE ADAPTERS FOR LIGHTY DUTY SUVS AND TRUCKS; P/N 20802
• GOLF AND TRIKE CROSS BAR ACCESSORY; P/N 20805
• HEIGHT EXTENSION KIT, RAISES LIFT’S OVERALL HEIGHT FROM 150 1/2″ TO 174 1/2″; P/N 21002
• WIDTH EXTENSION KIT, EXPANDS WIDTH BETWEEN COLUMNS TO 118 1/2″; P/N 20906

The AMGO Advantage:

AMGO is the United States brand of Peak Manufacturing.

PEAK corporation is located in Foshan ( near Guangzhou, China). They have over 20 years experience in the design, manufacture and global distribution of an extensive line of qualified automotive lifts including 2-post, 4-post, scissors and portable lifts. They produce equipment with CE certification and Australian Safety certification certificates.

PEAK designs products with features the market demands. Some of the technical innovations include Super-symmetric®, single-point safety release systems (two locks, one release), dual synchronous cylinders, hydraulic lock scissor lifts, and many more.  In 2014 PEAK establish their new Hydraulic Department to research and produce the hydraulic power unit in-house. AMGO Hydraulics lifts come with an ETL approved power unit.

The AMGO quality has no rival in the U.S. Their products have extremely competitive pricing and yet are considered to have some of the very best designs available.  It’s hard to find a reason NOT to buy an AMGO product like this OH-10 car lift.

Be sure to follow us on Facebook , Youtube, Instagram, Twitter, and LinkedIn for all our Social Media Updates!

Please leave this field empty

LET’S KEEP IN TOUCH!

We’d love to keep you updated with our latest news and offers

We don’t spam! Read our privacy policy for more info.

Check your inbox or spam folder to confirm your subscription.